sales@wh-hw.com
+86-631-5781196

Hydrocyclone

Hydro Cyclone

Description

Hydrocyclone is a continuous device that utilizes centrifugal force to accelerate the settling rate of particles. When feed slurry enters the hydrocyclone tangentially under pressure, as result of the high centrifugal forces, particles coarser than the “cut point” size migrate into a primary vortex adjacent to the wall and move forward to discharge with a small volume of water via the spigot. Particles finer than the “cut point” size migrate into a secondary upward-moving vortex, along the axis of the hydrocyclone and discharge with the majority of the water via vortex finder.

Application

Hydrocyclone is one of the most important devices in the minerals industry, it is widely used in the mineral industry processing as a classifier, which has proved extremely efficient at fine separation size. Hydrocyclone is widely used in closed circuit grinding operations but it also has many other applications, such as desliming, degritting, and thickening.

Benefits

1. Compact and simple structure
2. No moving parts
3. Low investment and running cost
4. Easy to install and simple to operate
5. High efficiency
6. High erosion resistance

Technical Parameters

Specifications Diameter(mm) Inlet Pressure(MPa) Capacity(m3/h) Cut Size(μm)
FX840 840 0.04-0.15 500-900 74-350
FX710 710 0.04-0.15 400-550 74-250
FX 660 660 0.04-0.15 160-450 74-220
FX610 610 0.04-0.15 200-300 74-200
FX500 500 0.04-0.2 140-240 74-200
FX400 400 0.04-0.2 100-170 74-150
FX350 350 0.04-0.2V 70-160 50-150
FX300 300 0.04-0.2 45-90 50-150
FX250 250 0.04-0.3 40-80 40-100
FX200 200 0.04-0.3 25-40 40-100
FX150 150 0.04-0.3 14-35 20-74
FX125 125 0.04-0.3 8-20 20-50
FX100 100 0.04-0.3 8-20 20-50
FX75 75 0.1-0.4 4-10 10-40
FX50 50 0.1-0.4 2-5 7-40
FX25 25 0.1-0.6 0.3-1 5-20
FX10 10 0.1-0.6 0.05-0.1 1-5

Your Name (required)

Your Email (required)

Subject

Your Message